|Home||» Products||» Hydraulic Machine Lab equipment||» SINGLE STAGE AIR COMPRESSOR TEST RIG|
Saini science industries manufacture of SINGLE STAGE AIR COMPRESSOR TEST RIG.
Single Stage Air Compressor Test Rig consists of a single stage reciprocating type air compressor driven by a motor through a belt. The outlet of the air compressor is connected to reservoir (Tank) and suction is connected to another air tank with an orifice plate and a water manometer. Bellow is fitted on one side of this air tank to regulate the flow. Temperature of inlet and outlet of air and pressure at outlet can be measured by Temperature sensor and pressure gauge.
To calculate the volumetric efficiency.
To calculate isothermal efficiency.
To calculate compression ratio.
Required for Operation:
Electricity supply: Single phase, 220V AC, 50 Hz, 5-15 amp combined socket with earth connection. Earth voltage should be less than 5 volts.
Floor Area: 1.5 m x 0.75 m.
Compressor : Single Stage, Capacity 4 CFM (max.) Working pressure 5 kg/cm² max.
Drive : 1 HP motor, Standard make
Manifold Tank : Suitable Capacity
Flow Measurement : Orifice-meter with Manometer
Air Tank : Capacity 90 Ltrs. with safety valve, shut off valve
Pressure Gauge : Bourdon Type
The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure
Standard make On/Off switch, Mains Indicator etc.
Temp. Measurement : RTD PT-100 type sensor (2 Nos.)
RPM measurement : RPM Indicator with Proximity sensor.
Scope of Delivery:
Self Contained “SINGLE STAGE AIR COMPRESSOR TEST RIG.”Apparatus
Instruction Manual consisting of experimental procedures, block diagram etc.