Cookie Img Back to top
Send SMS Send Inquiry
          Home » Products » Heat Transfer Lab Equipments » horizontal condenser apparatus

          horizontal condenser apparatus

          horizontal condenser apparatus
          horizontal condenser apparatus
          Send Inquiry
          Product Code : SSITH-028
          Brand Name : Saini
          Product Description

          The present set-up offers a comparative study of Horizontal condenser, which can be operated one at a time. Condenser consists of Stainless steel shell, with stainless steel tubes. Cold fluid flows through inside the tubes and steam flows through the shell. Valves are provided to control the flow rates of cold fluids. Flow rate of cold water is measured using a Rotameter. Shell is fitted with steam traps from where condensate is collected in measuring cylinder. Temperature of inlet and outlet of both hot & cold fluids are measured by temperature sensors.

          Objectives/Experiments:

          ·        To determine the overall heat transfer co-efficient and film co-efficient for  horizontal condenser


          Required for Operation:

          ·        Water supply 2 lit/min (approx.) and floor drain.

          ·        Electricity Supply: 1 Phase, 220 V AC, 4 kW.

          ·        Floor area of 1.5 m x 1 m.


          Technical Specifications:

          ·        System                                                 :              steam to water

          ·        condensers                                          :               horizontal ,  insulated by ceramic wool and cladded by aluminum foil. , shell & tube type

          shell                                                     :              material stainless steel

          ID 108 mm (approx.)

          Length    500 mm (approx.)

          Tubes                                                  :              material stainless steel , 12 nos.

          ID 9.5 mm , OD 12.7 mm (approx.)

          Length    500 mm (approx.)

          ·        Condensate measurement                   :              measuring cylinder & stopwatch

          ·        Water flow measurement                     :              rota-meters.

          ·        Steam generator                                  :              made of stainless steel with level indicator , pressure gauge  , safety valve , drain  and Insulated with ceramic wool and cladded by aluminum foil.

          ·        Heaters                                                :              nicrome wire heater (2 nos.).              

          Control Panel:

          ·        PID  Controller: 0-199.9°C, (For steam generator)

          ·        Digital Temp. Indicator: 0-199.9°C, with multi-channel switch

          ·        Temperature Sensors: RTD PT-100 type.

          ·        Standard make On/Off switch, Mains Indicator etc.


          Scope of Delivery:

          ·        1 Self Contained " horizontal condenser  " Apparatus

          ·        1 Instruction Manual consisting of experimental procedures, block diagram etc.

           


          SAINI SCIENCE INDUSTRIES
          X