|Home||» Products||» Hydraulic Machine Lab equipment||» DOUBLE STAGE AIR COMPRESSOR TEST RIG|
Saini science industries manufacture of DOUBLE STAGE AIR COMPRESSOR TEST RIG.
Two Stage Air Compressor Test Rig consists of a double stage reciprocating type air compressor driven by a motor through a belt. The outlet of the air compressor is connected to reservoir tank and suction is connected to another air tank with a orifice plate and a water manometer. Bellow is fitted on one side of the air tank to regulate the flow. Temperature of inlet air, after single compression, inlet and outlet of second compression and pressure in reservoir and at intermediate stage can be measured by Temp. Sensors and gauges.
To calculate the volumetric efficiency.
To calculate isothermal efficiency.
To calculate compression ratio.
Required for Operation:
Electricity supply: Single phase, 220V AC, 50 Hz, 5-15 amp combined socket with earth connection. Earth voltage should be less than 5 volts.
Floor Area: 2.5 m x 1.75 m.
Compressor : Double Stage, Double Cylinder, Capacity 6.9 CFM max. Working Pressure: Max. 7 kg/cm2
Drive : 2 HP motor, Standard make, Swinging Field type
Spring Balance : Dial type, 10 kg
Flow Measurement : Orifice meter with
Air Tank : Capacity 150 Ltrs. with safety valve, shut off valve,
Pressure Gauge : Bourdon Type.
The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure
Standard make On/Off switch, Mains Indicator etc.
Temp. Measurement : RTD PT-100 type sensor (2 Nos.)
RPM measurement : RPM Indicator with Proximity sensor.
Scope of Delivery:
Self Contained “DOUBLE STAGE AIR COMPRESSOR TEST RIG.”Apparatus
Instruction Manual consisting of experimental procedures, block diagram etc.