Cookie Img Back to top
Send SMS Send Inquiry
    Home » Products » Theory of Machine Lab Equipment » CAM ANALYSIS APPARATUS


    Send Inquiry
    Product Code : SSITOM-002
    Brand Name : Saini
    Product Description

    Technical Description: 

    The setup is a motorized unit consisting of a camshaft driven by a variable speed motor. The free end of the camshaft has a facility to mount the cam easily. The follower is properly guided in gunmetal bushes and the type of follower can be changed according to the cam under test. Graduated circular protractor is fitted co-axial with the shaft and dial gauge fitted on the follower shaft, is used to note the follower displacement for the angle of cam rotation. A spring is used to provide controlling force to the follower system. Weights on the follower shaft can be adjusted as per the requirement. An arrangement is provided to regulate the speed. The apparatus is very useful for testing the cam performance for jump phenomenon during operation and the effect of change of inertia forces on jump action of cam-follower during operation can be observed. Three sets of cams and followers are supplied with the apparatus. These are already hardened to reduce the wear.


    Learning Objectives/Experiments:

    ·        To plot the(Follower displacement Vs Angle of rotation) curves for different cam follower pairs

    ·        The follower bounce can be observed by using a stroboscope (Optional) effect of follower weight on bounce can be studied.

    ·        To study the effect of follower weight on bounce.

    ·        To study the effect of spring compression on bounce


    Required for Operation:

    ·        Floor Area 0.5 m x 1 m

    ·        Electricity Supply 220 V AC, Single Phase, 0.5 kW

    ·        Digital Stroboscope to view the jump phenomena.

    ·        Digital Tachometer


    Technical Specifications:

    ·        Cam Shaft : Material Stainless Steel

    ·        Cams: Tangent, Eccentric, Circular Arc, made of hardened alloy steel.

    ·        Followers: Roller, Knife edge, Mushroom, made of hardened alloy  steel.

    ·        Compression Spring : Provided

    ·        Weights : 1 kg., 500gm, 200 gm 100gm

    ·        Motor : Variable speed DC Motor with speed controller

    ·        The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure


    Control Panel:

    ·        Standard make On/Off switch, Mains Indicator etc.

    ·        Dial Gauge : Baker Mercer/Standard Make

    ·        Speed Control Unit.


    Scope of Delivery:

    1 Self-contained " CAM ANALYISIS " Apparatus

    1 Instruction Manual consisting of experimental procedures, block diagram etc.