Cookie Img Back to top
Send SMS Send Inquiry
          Home » Products » Heat Transfer Lab Equipments » Calandria evaporator apparatus

          Calandria evaporator apparatus

          Calandria evaporator apparatus
          Calandria evaporator apparatus
          Send Inquiry
          Product Code : SSITH-033
          Brand Name : Saini
          Product Description

          Evaporation deals with the concentration of a non-volatile solute from a solution by the removal of required amount of volatile solvent. Usually the solvent is water. By vaporizing a part of the solvent, useful product i.e. the concentrated solution or thick is produced and the vapour is discarded. It is a short tube vertical evaporator; the tubes are surrounded by a Stainless Steel jacket and fitted with accumulator. Dilute solution is feed to the evaporator and heated by Steam from a steam generator to concentrate the dilute feed solution to a desired level. The jacket is fitted with a steam trap and the condensate is collected at the end of trap. The vapours of volatile solvent are condensed in a shell & tube type condenser and the balance non-volatile solute collected in the accumulator is recycled through the evaporator.

          Objectives/Experiments:

          To concentrate a solution and to evaluate the following at steady state:-

          ·        Material and heat balance

          ·        Economy and the capacity of the evaporator for different feeding arrangement.

          ·        Overall heat transfer co-efficient


          Required for Operation:

          ·        Water supply and floor drain.

          ·        Electricity Supply: 1 Phase, 220 V AC, 4 kW.

          ·        Area floor : 2.5 m x 1.0 m .

          ·        Chemicals : sodium carbonate & distilled water


          Technical Specifications:

          ·        Evaporator: Material: Stainless Steel, Insulated with Ceramic Wool and Cladding with Aluminium Foil

          OD 250mm  mm , with central down take of 90 mm dia.

          ·        Feed Circulation: By Gravity Feed

          ·        Steam Generator: Made Of Stainless Steel Provided with Pressure Gauge & Level Indicator, Safety Valve and Drain Etc & Insulated with Ceramic Wool and Cladding with Aluminium Foil,

          ·        Feed Tank Material: Stainless Steel

          ·        Feed Tank Capacity:  20 Ltrs

          ·        Flow Measurement: Rotameters (One each for Feed & Cold Water)

          ·        Piping material: Stainless Steel And Pvc, Size ¼â€

          ·        Heaters:  Nichrome Wire Heater

          ·        Pump Capacity: Fhp

          ·        Condenser: Shell & Tube Type Made Of Stainless Steel

          ·        Bottom Product Tank: Made Of Stainless Steel, Capacity 10 Ltrs

          ·        Water Supply Tank: Made Of Stainless Steel, Capacity 50 Ltrs For Condenser

          ·        The whole set-up is ingeniously designed and schematically arranged on a powder-coated rigid structure

          Control Panel:

          ·        PID  Controller: 0-199.9°C, (For steam generator)

          ·        Digital Temp. Indicator: 0-199.9°C, with multi-channel switch

          ·        Temperature Sensors: RTD PT-100 type.

          ·        Standard make On/Off switch, Mains Indicator etc.


          Scope of Delivery:

          ·        1 Self Contained " calandria evaporator " Apparatus

          ·        1 Instruction Manual consisting of experimental procedures, block diagram etc.

           


          SAINI SCIENCE INDUSTRIES
          X